Victron SmartSolar MPPT 250/70-Tr VE.Can

R12,899.00

Victron SmartSolar MPPT 250/70-Tr VE.Can
Compare
SKU: 5001000069 Categories: , Product ID: 9382

Description

Victron SmartSolar MPPT 250/70-Tr VE.Can

 

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

 

Features

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

 

Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

 

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.

 

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

 

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

 

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%.

 

Flexible charge algorithm

Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

 

Extensive electronic protection

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

 

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

 

Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.

 

VE.Direct or VE.Can

For a wired data connection to a Color Control GX, other GX products, PC or other devices

 

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

 

VE.Can: the multiple controller solution

Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth

 

Remote on-off

To connect for example to a VE.BUS BMS.

 

Programmable relay

Can be programmed to trip on an alarm, or other events.

 

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

 

Brand

Victron

Additional information

Weight 3.6 kg
Brand

Victron Energy

Battery Voltage

12 / 24 / 48V Auto Select (software tool needed to select 36V)

Rated Charge Current

70A

Nominal PV Power, 12V

1000W

Nominal PV Power, 24V

2000W

Nominal PV power, 48V 1a,b)

4000W

Max. PV Short Circuit Current

70A (max 30A per MC4 conn.)

Maximum PV Open Circuit Voltage

250V absolute maximum coldest conditions
245V start-up and operating maximum

Efficiency

98%

Charge Algorithm

Multi-stage adaptive (eight preprorammed algorithms) or user defined algorithm

Data Communication Port

VE.Direct

IP Rating

IP43 (electronic components), IP22 (connection area)

Dimensions

H216 x W295 x D103mm

Weight

3.6kg

Warranty

5 Years

Specifications

SmartSolar Charge Controller 250/70 250/85 250/100
Battery Voltage 12 / 24 / 48V Auto Select(Refer to manual to select 36V)
Rated charge current 70A 85A 100A
Nominal PV power, 12V 1a,b) 1000W 1200W 1450W
Nominal PV power, 24V 1a,b) 2000W 2400W 2900W
Nominal PV power, 36V 1a,b) 3000W 3600W 4350W
Nominal PV power, 48V 1a,b) 4000W 4900W 5800W
Max. PV short circuit current  2) 35A (max 30A per MC4 conn.) 70A (max 30A per MC4 conn.)
Maximum PV open circuit voltage 250V absolute maximum coldest conditions

245V start-up and operating maximum

Maximum efficiency 99%
Self-consumption Less than 35mA @ 12V / 20mA @ 48V
Charge voltage ‘absorption’ Default setting: 14,4 / 28,8 / 43,2 / 57,6V

(adjustable with: rotary switch, display, VE.Direct or Bluetooth)

Charge voltage ‘float’ Default setting: 13,8 / 27,6 / 41,4 / 55,2V

(adjustable: rotary switch, display, VE.Direct or Bluetooth)

Charge voltage ‘equalization’ Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable)
Charge algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Temperature compensation -16 mV / -32 mV / -64 mV / °C
Protection  PV reverse polarity / Output short circuit / Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Maximum altitude 5000m (full rated output up to 2000m)
Environmental condition Indoor, unconditioned
Pollution degree PD3
Data communication port VE.CAN, VE.Direct or Bluetooth
Remote on/off Yes (2 pole connector)
Programmable relay DPST AC rating: 240VAC / 4A

DC rating: 4A up to 35VDC, 1A up to 60VDC

Parallel operation Yes, parallel synchronized operation with  VE.CAN or bluetooth
ENCLOSURE
Colour Blue (RAL 5012)
PV terminals 3) 35 mm² / AWG2 (Tr models)

Two pairs of MC4 connectors (MC4 models)

35 mm² / AWG2 (Tr models)

Three pairs of MC4 connectors (MC4

models)

Battery terminals 35mm² / AWG2
Protection category IP43 (electronic components), IP22 (connection area)
Weight 3 kg                   4,5kg
Dimensions (h x w x d) in mm Tr models: 185 x 250 x 95 mm

MC4 models: 215 x 250 x 95 mm

Tr models: 216 x 295 x 103

MC4 models: 246 x 295 x 103

STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V.
                                                                                    2) A PV array with a higher short circuit current may damage the controller.
3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Minimum 4 characters

Open chat
1
Good day!
How may we assist you?