Deye 16kW Single Phase Low Voltage Hybrid Inverter

Deye 16kW Single Phase Low Voltage Hybrid Inverter

The Deye SUN-16K-SG01LP1-EU is a high-capacity single-phase hybrid inverter engineered for properties requiring substantial solar generation, battery storage and backup-power capability. Its combination of a 16kW rated grid output, 20.8kW maximum PV input and high-current low-voltage battery connection makes it suitable for large homes, farms, offices and light-commercial installations.

The inverter intelligently manages electricity from the solar array, compatible battery bank, grid and supported generator connection. This gives the installer the flexibility to design a system that improves solar self-consumption, stores energy for later use and keeps selected loads operating when grid power is unavailable.

Powerful 16kW Single-Phase Output

The inverter delivers 16,000W of rated single-phase AC output with a rated current of 69.6A. It supports a maximum continuous AC passthrough current of 100A and provides a dedicated backup output rated at 14,000W.

For demanding starting loads, the off-grid output can supply up to twice the rated power for five seconds. A 6ms automatic switchover helps maintain power to compatible backup loads when grid supply is interrupted.

20.8kW Maximum Solar PV Input

With a maximum DC input power of 20,800W, the Deye 16kW hybrid inverter allows a suitably designed solar array to generate additional energy for daytime consumption and battery charging.

• Maximum PV input power: 20,800W
• Maximum DC input voltage: 500V
• PV start-up voltage: 125V
• MPPT operating range: 150-425V
• Rated DC input voltage: 370V
• Three MPPT trackers
• Two PV strings per MPPT tracker
• PV input current: 26A + 26A + 26A
• Maximum PV short-circuit current: 44A + 44A + 44A

The three independent MPPT trackers give installers greater flexibility when panels must be divided across different roof sections or orientations.

High-Current Low-Voltage Battery Support

The inverter operates with compatible 40-60V battery banks and supports both lithium-ion and lead-acid battery technologies. Its maximum charging and discharging current of 290A allows it to work with appropriately sized high-capacity battery storage systems.

Communication with compatible lithium battery management systems is available through CAN or RS485. The inverter automatically adapts its lithium charging strategy according to information received from the compatible battery BMS.

Flexible Hybrid Energy Management

Both DC coupling and AC coupling are supported, allowing the inverter to be used in a new hybrid solar installation or incorporated into a properly designed system with existing compatible solar equipment.

Six configurable charging and discharging time periods allow stored energy to be managed around electricity tariffs, solar availability and anticipated load requirements. The system can also store energy supplied by a compatible diesel generator when configured by a qualified installer.

Scalable Parallel Operation

Up to 16 compatible inverter units can be connected in parallel for approved on-grid and off-grid applications. Parallel system design, communication, protection and commissioning must be completed according to Deye requirements.

Efficiency and Integrated Protection

• Maximum efficiency: 97.6%
• European efficiency: 96.5%
• MPPT efficiency: 99.9%
• PV lightning protection
• Anti-islanding protection
• PV reverse-polarity protection
• Insulation-resistance detection
• Residual-current monitoring
• Output overcurrent and short-circuit protection
• DC Type II and AC Type III overvoltage protection

Durable Wall-Mounted Design

The IP65 enclosure is designed for wall-mounted installation in an appropriate location. Smart cooling maintains operating performance while the specified noise level of less than 30dB helps reduce disturbance.

• Dimensions: 464 x 300 x 798.4mm (W x D x H)
• Weight: 48.5kg
• Operating temperature: -45°C to 60°C, with derating above 45°C
• Communication: CAN and RS485
• Warranty: Five years, subject to manufacturer terms

Professional System Design Required

The inverter must be installed and commissioned by a qualified solar installer or electrician. Battery compatibility, PV string voltages, cable sizes, protection equipment, earthing and backup-load requirements must be confirmed before installation.

Choose the Deye 16kW hybrid inverter when your property needs strong single-phase output, substantial solar capacity and flexible battery integration within one scalable energy-management platform. Contact JC Solar Panels for compatible batteries, solar panels, mounting equipment, switchgear or a complete professionally designed solution.