Deye 10kW Hybrid Inverter – Version 3

Deye 10kW SUN-10K-SG06LP1-EU-CM3 Hybrid Inverter – Version 3

The Deye 10kW Version 3 is a high-capacity single-phase low-voltage hybrid inverter designed for residential solar, substantial battery-backup systems and selected light-commercial applications. It combines 10kW rated AC power, three MPPT trackers, 16kW maximum PV input power and high-current 40–60V battery support in one intelligently managed energy platform.

By coordinating solar generation, battery storage, the utility supply and a compatible generator, the inverter gives the system designer more ways to reduce grid consumption, preserve backup energy and keep priority loads operating during interruptions. Final array, battery, generator and load sizing must be completed by a qualified solar professional.

Three MPPT trackers for flexible solar-array design

Three independent MPPT trackers with a 2+1+1 string arrangement allow compatible PV modules to be divided across different roof areas, orientations or electrical string layouts. The trackers operate across a 150–425V MPPT range, with a 125V start-up voltage and 500V maximum PV input voltage.

This added input flexibility can simplify array design where one uninterrupted roof plane is not available. Each string and tracker must still remain within Deye’s stated voltage and current limits under all expected site temperatures.

16kW maximum PV input power

The inverter supports up to 20kW of connected PV access power and specifies 16kW as its maximum PV input power. This high solar-input allowance can increase daytime energy availability for simultaneous load supply, battery charging and permitted grid export, subject to local regulations and the final system configuration.

The verified maximum operating PV input current is 36+18+18A, with maximum short-circuit current ratings of 54+27+27A across the three trackers. Correct module selection and string engineering are essential.

High-current 48V-class battery support

The 40–60V battery operating range supports compatible low-voltage lithium-ion or lead-acid battery banks. Maximum charging and discharging current is 220A, enabling substantial energy transfer when the selected battery, cabling, protection equipment and installation are rated accordingly.

For compatible lithium batteries, charging can adapt to battery-management-system information. Battery compatibility, CAN communication, current limits and the approved Deye protocol must be confirmed before purchase and commissioning.

10kW output with strong backup capability

The SUN-10K-SG06LP1-EU-CM3 provides 10,000W rated AC input/output active power and up to 11,000VA apparent power. In off-grid operation it can supply up to twice rated power for 10 seconds, helping with brief starting surges from compatible loads without changing the inverter’s 10kW continuous rating.

A 70A maximum continuous AC passthrough rating supports practical essential-load and whole-site design options where permitted. Connected loads, phase capacity, battery discharge capability and all protection devices must be engineered within their continuous and surge ratings.

Generator support, AC coupling and time-of-use control

The hybrid platform supports storing energy from a compatible diesel generator, allowing generator operation to contribute to battery charging where the system is correctly designed and configured. AC coupling can also support the retrofit of an existing compatible solar system.

Six programmable charging and discharging time periods give the owner or installer greater control over when grid or solar energy is stored and when battery energy is used. This can support time-of-use management, backup-reserve planning and improved self-consumption.

Expandable parallel operation

Up to 16 compatible inverters can operate in parallel in on-grid or off-grid applications, subject to Deye’s approved design, firmware, accessories and commissioning requirements. This provides a route for larger projects or future expansion without changing to a completely different product family.

Monitoring, interface and integrated protection

A colour touch LCD provides local system information and configuration access. Wi-Fi, RS485 and CAN communication support monitoring and compatible battery integration.

Built-in protection functions include DC reverse-polarity protection, AC output overcurrent and overvoltage protection, thermal protection, AC short-circuit protection, DC-component monitoring, anti-islanding protection, insulation-impedance detection, residual-current monitoring and a DC switch. Type II surge protection is specified on both the DC and AC sides, while arc-fault circuit interruption is listed as optional.

Efficient energy conversion

The inverter reaches up to 97.6% maximum efficiency, 96.5% European efficiency and more than 99% MPPT efficiency. Low conversion losses help more available solar and stored energy reach the connected system, although actual performance varies with loading, voltage, temperature and operating mode.

Built for demanding installation environments

The IP65 enclosure is suitable for protected indoor or outdoor installation in accordance with Deye’s installation instructions. Intelligent air cooling manages operating temperature, while the specified ambient range is -40°C to +60°C with output derating above 45°C. The inverter is rated for 0–100% permissible humidity, operation up to 3000m altitude and noise below 45dB.

The unit measures 340 × 580 × 234mm excluding connectors and brackets and weighs 24.6kg. The mounting position, clearances, wall strength, ventilation and service access must comply with the installation manual.

Warranty and compliance

Deye lists a 5-year or 10-year warranty depending on the final installation site and applicable warranty policy. Warranty eligibility can depend on the authorised sales channel, installation quality, commissioning, registration and operating conditions, so the applicable written warranty terms should be confirmed for the project.

The datasheet lists relevant grid, safety and EMC standards including NRS 097, EN 50549, G99, VDE-AR-N 4105 and IEC/EN 62109-1/-2. Final approval remains subject to the local network operator, municipal requirements and the installed configuration.

Important purchase information

This product listing is for the Deye SUN-10K-SG06LP1-EU-CM3 inverter only. Batteries, solar panels, mounting equipment, a generator, distribution boards, switchgear, surge protection, isolators, cables, monitoring accessories, delivery, engineering, installation and a Certificate of Compliance are not included unless specifically stated in a written JC Solar Panels quotation.

Before ordering, confirm the site supply, required backup loads, PV string design, battery model and capacity, BMS protocol, generator compatibility and local compliance requirements. Professional installation and commissioning by qualified personnel are required.