Felicity Solar HOPE1000 1kWh Portable Backup Power Station
The Felicity Solar HOPE1000 is a compact portable backup-power solution that combines a 1kWh LiFePO4 battery, 250W inverter and MPPT solar charge controller in one plug-and-play unit. It is designed to provide convenient power for compatible small household devices, electronics and outdoor applications without requiring a permanently installed inverter and battery system.
At only 8.7kg, the HOPE1000 is easy to move between rooms, take on trips or use where temporary backup power is required. It can be charged from a compatible AC supply or a correctly sized solar panel through its 12V to 36V PV input.
Integrated 3-in-1 Backup Power
- Integrated pure backup inverter, LiFePO4 battery and MPPT controller
- 1kWh rated battery capacity
- 250W rated AC output power
- 230V AC output with a stated ±10% tolerance
- 50Hz operating frequency
- Plug-and-play operation
LiFePO4 Battery Storage
The integrated lithium iron phosphate battery provides 1kWh of rated energy storage. Felicity Solar states a battery life of 8,000 cycles, supporting long-term use when the unit is operated within its specified limits.
- LiFePO4 battery chemistry
- 1kWh rated battery energy
- 314Ah cell capacity stated by the manufacturer
- 8,000-cycle manufacturer-stated battery life
- Up to one year stated shelf time when fully charged
AC and Solar Charging
- 150V to 264V AC input-voltage range
- 45Hz to 55Hz AC input-frequency range
- 250W AC charging power
- 12V to 36V PV input-voltage range
- 200W maximum PV input power
- Dual charging options through grid power or compatible solar PV
The connected solar panel must remain within the 12V to 36V PV input range and the 200W maximum input-power limit. Panel voltage must be verified before connection.
Portable Power for Compatible Loads
The 250W output is suitable for compatible devices whose combined continuous demand and starting surge remain within the power station’s limits. Typical uses may include lighting, routers, laptops, phone chargers, televisions and other low-power electronics, subject to each device’s actual consumption.
The HOPE1000 is not intended to run high-power appliances such as kettles, heaters, stoves, geysers, large refrigerators, pumps or power tools that exceed its output capability. Actual runtime depends on the connected load, battery condition, ambient temperature and conversion losses.
Integrated Protection
- Battery overcharge protection
- Battery overdischarge protection
- Overcurrent protection
- Overload protection
- Short-circuit protection
- Fault protection
- Ventilation openings for heat dissipation
Dimensions and Operating Conditions
- Product dimensions: 210 x 130 x 288mm
- Net weight: 8.7kg
- Operating-temperature range: 0°C to 45°C
- Maximum operating altitude: below 2,000m
- Maximum stated humidity: 95%
- IP20 ingress-protection rating
- UN38.3 certification listed by the manufacturer
Simple, Quiet Backup Power
The HOPE1000 provides a convenient alternative to a fuel generator for light electrical loads. Its compact all-in-one construction allows users to access stored energy without generator fuel, exhaust emissions or a complex permanent installation.
Only compatible appliances and charging sources may be connected. Customers should compare appliance wattage and starting requirements with the 250W rated output before purchase.
Reviews
There are no reviews yet.