Victron Energy Quattro Inverter/Charger 48/8000/110-100/100 230V
Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.
Two AC Inputs & two AC Outputs
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
JC Solar Panels is excited to provide internationally trusted Victron Inverters. The Victron Quattro 48/8000/110-100/100 230V VE.Bus is a large inverter charger featuring dual AC points, a significant peak power of 16000W, and substantial 110A battery charger. All Victron equipment includes a 5 year warranty. The rest of the Quattro’s impressive features are listed below.
Inverter and charger specs:
- Maximum feed through current (A) 2 x 100A
- Continuous output at 25C 8500VA
- Continuous output at 25C 6500W
- Continuous output at 40C 5500W
- Continuous output at 65C 3600W
- Peak power 16000W
- Maximum efficiency 96%
- Zero load power 60W
- Charge voltage absorption 57V, 6DC
- Storage mode 52V, 8 DC
- Charge current house battery 110Amps
- Battery temperature sensor Yes
The Quattro is a highly advanced inverter, and features:
- Programmable relays
- Protection for short circuits, overloads, high battery voltages, low battery voltages, high temperatures, ineffective voltage ripples
- VE. Bus communication port this allows remote monitoring and system integration on three phase operations
- 2 AC ports
The inverter meets EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1safety standards, and also satisfies EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3emission standards.
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.
Unique PowerAssist feature
The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Virtually unlimited power thanks to parallel operation
Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
Remote Monitoring and Control
Monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more…