You are here:

Victron SmartSolar MPPT 250/100-Tr VE.Can

Victron SmartSolar MPPT 250/100-Tr VE.Can

R9,775.00 Incl. VAT

Victron SmartSolar MPPT 250/100-Tr VE.Can

Out of stock

SKU 5001000068 Categories ,

Description

Victron SmartSolar MPPT 250/100-Tr VE.Can

 

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

 

Features

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

 

Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

 

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.

 

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

 

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

 

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%.

 

Flexible charge algorithm

Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

 

Extensive electronic protection

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

 

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

 

Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.

 

VE.Direct or VE.Can

For a wired data connection to a Color Control GX, other GX products, PC or other devices

 

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

 

VE.Can: the multiple controller solution

Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth

 

Remote on-off

To connect for example to a VE.BUS BMS.

 

Programmable relay

Can be programmed to trip on an alarm, or other events.

 

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

 

Additional information

Weight 4.5 kg
Brand

Victron Energy

Battery Voltage

12 / 24 / 48V Auto Select (software tool needed to select 36V)

Rated Charge Current

100A

Nominal PV Power, 12V

1450W

Nominal PV Power, 24V

2900W

Max. PV Short Circuit Current

70A

Maximum PV Open Circuit Voltage

250V absolute maximum coldest conditions 245V, start-up and operating maximum

Efficiency

98%

Charge Algorithm

Multi-stage adaptive (eight preprorammed algorithms) or user defined algorithm

Data Communication Port

VE.Direct

IP Rating

IP43 (electronic components), IP22 (connection area)

Dimensions

H216 x W295 x D103mm

Weight

4.5Kg

Warranty

5 Years

Brand

Victron Energy

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.