Kodak 5kw solar system overview
Kodak 5kw solar system
Kodak 5kw solar system information
The Kodak 5kw solar system consists of a KODAK Solar Off-Grid Inverter VMIII 5kW 48V inverter with 6 JA Solar 495W Mono PERC Half-Cell MBB Silver Frame modules and Kodak 5.12kWh 48V Battery Module.
This system can discharge a maximum 5250W of AC energy for powering household loads. This system would power typical household loads of 1kW for about 5.12 hours.
|6||JAM66S-30-495-MR||JA Solar 495W Mono PERC Half-Cell MBB Silver Frame|
|1||DNLS10MB||Dektite Lead Multicable Solar Flashing (Tiled or Slate)|
|20||REN-420165||Roof Hook Eco Basic (no wood screws )|
|8||REN-420081||End Clamp+ 30 – 50mm Silver|
|8||REN-420082||Middle Clamp+ 31 – 51mm Silver|
|3||REN-900305-21||Wood screw pan head 6 x 80 (Bag of 21)|
|8||REN-900246||VarioSole + End Cap 41X35 rail Single – Grey|
|4||REN-400525||VarioSole+ Mounting rail 41 x 35 x 4400 mm|
|1||MC4-2M-2||MC4 Pre terminated cable 2m (Pack of 2)|
|1||MC4-CONN-2PACK||MC4 Connector Twin Pack ( Kit 1 )|
|1||HLK-CABLE4-1-25-BR||Helukabel 4mm2 single-core DC cable 25m – Black and Red|
|2||KG41-T203-GBA270||K&N Single Phase AC Switch Disconnector 40A|
|1||BOHAZARD-SET||PV on Roof and Hazard Labels Pack|
|1||OG5.48||KODAK Solar Off-Grid Inverter VMIII 5kW 48V|
|1||DCB-NF-1I-600V-I16A-I_II-1O||600V Protection Box 1 Inputs 1 Outputs 16A Isolator Type I_II SPD|
|1||FL5.2||Kodak 5.12kWh 48V Battery Module|
|2||BATCAB35-1M-PAIR||Pair of BATCAB35-1M|
|1||KETO-00-125A||KETO Battery Disconnector with 125A Fuses|
|1||FL5.2-CABLE||Cable Pack for Kodak FL5.2|
|1||BAT-HAZ-PACK||Battery Hazard Label Pack|
Kodak 5kw solar system inverter
The (OG 5.48) KODAK Solar Off-Grid Inverter VMIII 5kW 48V is ideal as an affordable and fully functional center of your off-grid system. The wide MPP voltage range makes DC string design with your choice of module easy. It’s best suited to smaller domestic systems where no parallel operation is needed.
- Removable LCD control module with multiple communications servers and ATM
- Built-in Bluetooth for mobile monitoring (Android App is available)
- Replaceable fan design for ease of maintenance Supply load from Grid or PV, even battery is not available
- Configurable AC/PV output usage timer and prioritization Selectable high power charging current
- Selectable input voltage range for home appliances and personal computers
- Compatible to Utility Mains or generator input Auto restart while AC is recovering Cold start function
Note: The Kodak VMIII inverter has a RS485 port that can be connected to the RS485 port on the Pylontech batteries for BMS communication. Therefore no other control module, such as the ICC, is needed.
Kodak 5kw solar system solar panels
- Rating: 495W
- Efficiency: 20.8%
- Width: 1,134mm
- Height: 2,094mm
JA Solar multi-busbar Mono PERC Half-Cell Module.
- High output power
- Less shading effect
- Lower temperature coefficient
- Better mechanical loading tolerance
- Efficiency of up to 21.3%
Comes with a 12-year product warrant and 25-year linear power output warranty.
Please note modules come with QC4.10 connectors.
Kodak 5kw solar system battery
The FL5.2 Kodak battery is a high performance, scalable battery module. The incredible 1C charge and discharge rate ensure you have the power when it is demanded. Each module has a capacity of 5.12kWh and can be configured in parallel up to 4 units for a total of 20.48kWh.
Installation is easy, with a plug and play solution that can save time when installing.
- 89% charge and discharge efficiency
- 90% DoD
- Wide temperature tolerance
- Easy to install
- >6000 Life cycle
- CAN/RS485 communication
- Scalable up to 20.48kWh
Only logged in customers who have purchased this product may leave a review.