Vestwoods VT48100E Lithium Battery Module
The VT48100E is an intelligent Lithium Battery, integrated with self-designed BMS, developed and produced by Vestwoods. It’s widely used in various telecom and energy storage systems such as indoor distribution stations, integrated base stations, edge stations, micro-cell stations, FTTX equipment, distributed power supplies, and standby and deep cycle ESS.
- 48 / 51.2 V DC
- 100 Amps
- High-quality LFP cells from a leading mfg.
- Superior energy density: ≥103 Wh/kg
- High rate charge/discharge current @1C
- Long design life: up to 15 years @25° Celsius
- High efficiency between charge and discharge
- SOC/SOH dynamic updating
- CAN/Modbus/SNMP V2/SNMP V3 (optional)
- Multiple protection methods based on patented BMS
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC, and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null and void.
The warranty does not cover damage resulting from:
Power surge, Under-voltage, Over-voltage, Lightning, Corrosion, Seaspray, Condensation, Water damage, Dust or any solid particles, Sand, Insects, Lizards, Excessive heat exposure, Weather damage, Negligence by the installer or homeowner, Incorrect installation, Inadequate protection device rating, Tampering (broken seal), Dirty filters, Exceeding the maximum power rating, current or voltage for the input solar circuit, DC battery input, AC input, and AC output.
The warranty will be void if the unit is:
Not installed as per manufacturers specifications, Not installed with a minimal 40kA surge protection unit for both live and neutral wires from the AC incoming supply, Not installed with a minimal 40kA surge protection unit for both positive and negative wires from the AC incoming supply, Not protected by the calculated and required 2 pole breakers for the input and output of the inverter, Not installed with a changeover switch, The battery input must be protected by a rated fuse for both the negative and positive connections, within the calculated PSCC ratings., Tampered with (attempted to open the unit), Visible damage to the unit